Air Balancing HVAC Systems

Methods of Air Balancing

Air balancing a distribution system is needed to properly direct the air flow in order to optimize the system’s design. Flow rates are tested, adjusted, and balanced as cubic feet per minute (CFM) or cubic meters per hour (m3/h). There are two traditional methods for balancing airflow at the terminals. The first is sequential balancing, which involves setting the zone and branch dampers in sequence. However, the most common method of air balancing is called proportional balancing.

Continue reading “Air Balancing HVAC Systems”

Balancing a HVAC System with Multiple Diffuser Types

The Problem

  • Standard air flow hoods do not correct for diffuser type when balancing a system.
  • Proportional balancing is extremely difficult when a mixture of diffusers are present, due to the inaccuracy of standard hoods on slot diffusers.
  • Below is a sample of diffusers tested on Dwyer’s Precision Air Calibration Station (Figure A) with a standard air flow hood followed by the Dwyer SMART Air Hood™ Balancing Instrument (Series SAH).

Figure A: Precision Air Hood Calibration Station
Continue reading “Balancing a HVAC System with Multiple Diffuser Types”

Air Velocity and Flow Measurement with Pitot Tubes

Dwyer Instruments offers many styles of Pitot tubes, which are a commonly used sensor  for monitoring air velocity and flow rate in heating, ventilation, and air conditioning.

Pitot tubes are based on Bernoulli’s equation, which states an increase in the speed of a fluid occurs simultaneously with an increase in dynamic pressure and a decrease in static pressure.  Pitot Tubes sense the dynamic pressure of the fluid flow at a particular point and were invented by French Engineer Henri Pitot in the early 18th century.

Continue reading “Air Velocity and Flow Measurement with Pitot Tubes”