Posted on

Understanding Air Velocity Sensors

Dwyer Instruments offers a multitude of sensors for monitoring air velocity in HVAC systems. Some of this instrumentation has a simple construction (Pitot tubes, for example) while others are more complex, such as hot-wire anemometers.

The initial term and first “hot-wire anemometer” was developed back in 1914 by Louie Vesso King. He is also accredited for King’s Law, which mathematically describes heat transfer in air flows using a heated wire. As the air moves over the wire, it causes a loss of temperature in the wire and removes some of the wire’s heat energy. Continue reading “Understanding Air Velocity Sensors”

Posted on

How Ultrasonic Flowmeters Work

animation of flow moving through ultrasonic flowmeter

animation of flow moving through ultrasonic flowmeterUltrasonic flowmeters use sound waves to determine the velocity of a fluid flowing in a pipe. At no flow conditions, the frequencies of an ultrasonic wave transmitted into a pipe and its reflections from the fluid are the same. Under flowing conditions, the frequency of the reflected wave is different due to the Doppler effect. When the fluid moves faster, the frequency shift increases linearly. The transmitter processes signals from the transmitted wave and its reflections to determine the flow rate. Continue reading “How Ultrasonic Flowmeters Work”

Posted on

Semiconductor Tool Parameter Monitoring Solutions

A semiconductor transistor is a part with specific electronic properties that allow it to serve as a component in microchips and modern electronics like phones, laptops, and more. As these components are small and require precise manufacturing methods, there are facilities dedicated to their manufacture.

These facilities consist of several levels including air handlers and scrubbers for exhaust, HEPA room, fab cleanroom, and subfab areas. The control of pressure, flow, and temperature within the facility is essential.

Semiconductor process tools are used for the production of microchips and other microelectronic components. These process tools are highly engineered and have a multitude of applications such as pneumatics, electrical, electronics, fume exhaust, chemical & gas distribution, radio frequency (RF) generation, and ultra-high vacuum. Dwyer products help to ensure that process tools are being monitored and controlled to the system owner’s designated parameters.  Continue reading “Semiconductor Tool Parameter Monitoring Solutions”