Hi-Flow™ Control Valves vary the flow in a system by throttling the valve plug in and out of the valve seat. The corresponding flow rate through the valve is based on the valve plug and seat type, which is part of the valve trim. Dwyer Instruments, Inc. offers several flow characteristics, needle plugs, and restricted trim options for the Hi-Flow™ Control Valve series.
Dwyer Instruments, Inc. offers many types of flow measuring products including orifice plates, which are used as a flow sensing element with a differential pressure monitor.
Orifice plates are a primary flow element, detecting the flow of a fluid passing through the plate by sensing the pressure drop across the plate. When a fluid flows through a restriction in a pipe, it creates a pressure difference between upstream and downstream of the restriction. This pressure difference is proportional to flow rate according to Bernoulli’s principal, similar to a Pitot tube. Orifice plates are commonly used as they are simple to use, low cost, work with gases or liquids, and require low maintenance. Adversely, they do have large pressure losses with about 50% of the pressure drop not recoverable. Continue reading “Flow Measurement with Orifice Plates”
The Mercoid® Division of Dwyer Instruments, Inc. offers four series of submersible level transmitters with different features suitable for different applications: the FBLT, PBLT, MBLT, and SBLT.
Submersible Level Transmitters are pressure transmitters manufactured to read hydro-static pressure from inside the fluid. These transmitters are submersed into the fluid that they are measuring and will give an output proportional of the fluid level above the sensor location. Continue reading “Submersible Level Transmitters”