In many industrial processes, the materials and the end product or by-products of the process, such as dust or vapors, can create conditions for a hazardous environment. Processes that have potential for hazardous environments include: water treatment, oil drilling, gas and chemical processing, power generation, pharmaceutical, and food manufacturing. The measurement and control of these processes are essential in maintaining optimal conditions of the manufacturing system and preventing catastrophic events. Continue reading “The Operation of Gages and Switches in Hazardous Environments”
pressure with a liquid filled manometer. The manometer worked on the principle that the difference in air pressure is measured as a function of gravity and liquid density. The challenge, however, was that the liquid in the manometer evaporates over time. This means that individuals would need to regularly add more liquid and re-calibrate the device. Continue reading “The Making of a Market Leader – The Magnehelic® Differential Pressure Gage”
- Standard air flow hoods do not correct for diffuser type when balancing a system.
- Proportional balancing is extremely difficult when a mixture of diffusers are present, due to the inaccuracy of standard hoods on slot diffusers.
- Below is a sample of diffusers tested on Dwyer’s Precision Air Calibration Station (Figure A) with a standard air flow hood followed by the Dwyer SMART Air Hood™ Balancing Instrument (Series SAH).
Figure A: Precision Air Hood Calibration Station
Continue reading “Balancing a HVAC System with Multiple Diffuser Types”
Dwyer Instruments offers many styles of Pitot tubes, which are a commonly used sensor for monitoring air velocity and flow rate in heating, ventilation, and air conditioning.
Pitot tubes are based on Bernoulli’s equation, which states an increase in the speed of a fluid occurs simultaneously with an increase in dynamic pressure and a decrease in static pressure. Pitot Tubes sense the dynamic pressure of the fluid flow at a particular point and were invented by French Engineer Henri Pitot in the early 18th century.
How will the installation of a Magnehelic® Differential Pressure Gage 150 feet away from the pressure source affect accuracy?