Have you ever noticed that some pressure sensors have units listed in PSIG while others list PSIA? There are numerous applications where pressure sensors are used and some applications require a different reference to ensure the most accurate pressure measurement. Continue reading “What is Absolute Pressure and When to Consider Using an Absolute Pressure Sensor?”
Dwyer Instruments, Inc. offers many types of flow measuring products including orifice plates, which are used as a flow sensing element with a differential pressure monitor.
Orifice plates are a primary flow element, detecting the flow of a fluid passing through the plate by sensing the pressure drop across the plate. When a fluid flows through a restriction in a pipe, it creates a pressure difference between upstream and downstream of the restriction. This pressure difference is proportional to flow rate according to Bernoulli’s principal, similar to a Pitot tube. Orifice plates are commonly used as they are simple to use, low cost, work with gases or liquids, and require low maintenance. Adversely, they do have large pressure losses with about 50% of the pressure drop not recoverable. Continue reading “Flow Measurement with Orifice Plates”
Submersible Level Transmitters are pressure transmitters manufactured to read hydro-static pressure from inside the fluid. These transmitters are submersed into the fluid that they are measuring and will give an output proportional of the fluid level above the sensor location. Continue reading “Submersible Level Transmitters”
Dwyer Instruments, Inc. offers many temperature measuring products that use bimetal sensors as the sensing element.
Bimetal Thermometers measure temperature based on the differences in thermal expansion properties of metals. Pieces of metals with different thermal expansion coefficients are attached to each other in an assembly.
As the temperature applied to the metal sensor assembly increases, the metal strip with the larger temperature coefficient of expansion expands more. Continue reading “Bimetal Thermometers”
Question: Can the Flotect® Vane-Operated Flow Switch, Series V4, be installed in a vertical pipe run?